● POWER - The DR-60 specs out with 24 volts at 2.5 amps and has a universal AC input range; Gone through 100% full load burn-in tests; Input voltage 88-264VAC / 124-370VDC at 47-63Hz, switch-selectable
● Easy install - the door-60 series power supply was designed to easily install on din rail ts-35/7.5 or 15 rails to provide for an efficient and organized work space
● Protections - the power supply protects against short-circuits, overloading, over-voltage, and over temperature ensuring you and your place of work remain safe and recovers automatically after failure
● Industrial - this power supply is designed to work with the most rigorous of machinery and adaptations including heavy machinery like CNC machines
MODELDR-60-5DR-60-12DR-60-15DR-60-24
OUTPUTDC VOLTAGE5V12V15V24V
RATED CURRENT6.5A4.5A4A2.5A
CURRENT RANGE0 ~ 6.5A0 ~ 4.5A0 ~4A0 ~ 2.5A
RATED POWER32.5W54W60W60W
RIPPLE & NOISE (max.) Note.280mVp-p120mVp-p120mVp-p150mVp-p
VOLTAGE ADJ. RANGE4.75 ~ 5.5V10.8 ~ 13.2V13.5 ~ 16.5V21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3±2.0%±1.0%±1.0%±1.0%
LINE REGULATION±1.0%±1.0%±1.0%±1.0%
LOAD REGULATION±1.0%±1.0%±1.0%±1.0%
SETUP, RISE TIME100ms, 30ms/230VAC 200ms, 30ms/115VAC at full load
HOLD TIME(Typ.)100ms/230VAC 23ms/115VAC at full load
INPUTVOLTAGE RANGE88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE47 ~ 63Hz
EFFICIENCY (Typ.)76%82%83%84%
AC CURRENT1.2A/115VAC 0.8A/230VAC
INRUSH CURRENT(max.)COLD START 18A/115VAC 36A/230VAC
PROTECTIONOVERLOAD105 ~ 160% rated output power
Protection type: Constant current limiting,
recovers automatically after fault condition is removed
OVER VOLTAGE5.75 ~ 6.75V13.8 ~ 16.2V17.25 ~ 20.25V27.6 ~ 32.4V
Protection type: Shut down o/p voltage, re-power on to recover
ENVIRONMENTWORKING TEMP.-20 ~ +60ºC
WORKING HUMIDITY20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY-40 ~ +85ºC, 10 ~ 95% RH
TEMP. COEFFICIENT±0.03%/ºC (0 ~ 50ºC)
VIBRATION10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)SAFETY STANDARDSDesign refer to UL60950-1, TUV EN60950-1, EN50178
WITHSTAND VOLTAGEI/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC
EMI CONDUCTION & RADIATIONCompliance to EN55022 (CISPR22) Class B
HARMONIC CURRENTCompliance to EN61000-3-2,-3
EMS IMMUNITYCompliance to EN61000-4-2, 3, 4, 5; ENV50204, EN55024,
Light industry level, criteria A
OTHERSMTBF216.2K hrs min. MIL-HDBK-217F (25ºC)
DIMENSION78*93*56mm (L*W*H)
PACKING0.3Kg; 48pcs/15.4Kg/1.02CUFTDin Rail Power Supply factory
website:http://www.cnak.com/power-supply/din-rail-power-supply/