All Purpose Contact Adhesive is rubber based contact adhesive suitable for use with a wide variety of materials for both professional.
Carefully clean the surfaces be bonded,smear the glue on both surfaces,then wait for a while,about 10-18mins according to the room temperature joint the parts together and press them.
Warnings
1.Not to mix the product with other adhesives.
2.The glue tank should be well covered to avoid any dust or contamination.
3.Avoid used in the wet circumstance,because it would be some condensation in the surface of glue so that against the effectiveness.
4.Delay the open time properly in the wet weather.
5.Place in the cool room ,avoid sunshine and fire.
Storage&Shelf Life
1.The material can be stored indoor for 12 months, from the date of manufacture, in its original packages under dry and clean conditions at ambient temperature below 35℃ and above 10℃.
2.Direct sunlight and moisture condensation must be prevented.
China Contact Adhesive manufacturers
website:http://www.hd-adhesive.com/decorative-adhesive/contact-adhesive/