Production introduction
Professioanl manufacturer for handheld plastic extrusion welder.We look for distributors all over the world. In order to build long term business cooperation.we will try all our best to support our distributors
Product Parameter(specification)
ModelBOSITE-5001 hand extruder
Related Voltage230V
Frequence50Hz
Drive motor power800W
Hot air gun power2000W
Air volume400L/min
Heat airTemperature20-750 degree
heating system for
plastic rod temperature0-480 degree
Diameter of welding rod蠁3.0mm/4.0mm
Extruding capacity2kgs/h
Product qualificationCE RHOS
Protection classDouble insulated
Net weight6.5KGS
Absorbed the technology from similar products of Germany and Italy and adopted hot air machines. Due to large power, the extrusion volume could reach 3KG, Its performance is stable, the intergrated design is adopted for the pre-heating air and screw extruder.
The welding quality is good and the mould design is smooth without any blockage.
There is no dead corner and carbonization.
The fan imported from Switzerland is installed to ensure large air output, adequate heat, and the base materials will have a higher temperature prior to adhesion in order to achieve good melting effect.
The machine could be operated simply and light in weight, (only 4kg), which helps to weld the position that is difficult to reach.
Usage:
welding PP/PE/PVC plates, vessels and chemical tanks,
connecting pipelines, making pipe bends,
connecting and sealing various plastic pipes,
making and fixing plastic tanks, welding plastic sheets,
making pipe fittings and bending products in different shapes.
In particular, our products are fit for outdoor onsite operation.
Suitable for roof waterproofing membrane local repair welding
Product details as belowExtrusion Welders suppliers
website:http://www.plasticweldingtool.com/extrusion-welders/